Are you looking for an HCC removable bollard manufactured to the official Hume City Council specification? SHUG Bollards can help. We custom manufacture removable bollards built to the Hume City Council standard landscape drawing SLD-2.3A, ready for installation across the municipality.
Whether you are a contractor working on a council project, a landscaper fitting out a shared path, or a property owner required to meet HCC standards, SHUG can manufacture and supply these bollards to exact spec.
What Is the Hume City Council Standard Bollard?
The HCC removable bollard is a specific design outlined in council’s standard landscape drawing SLD-2.3A. It is the required bollard type for council projects, shared paths, parks, reserves, and access-controlled areas within the Hume municipality.
This bollard is designed to be inserted into an in-ground sleeve and secured with a padlock. As a result, authorised personnel can remove it when vehicle access is needed and replace it when the area needs to be secured again.
The design is robust, highly visible, and purpose-built for Australian conditions. It is widely used across Hume City Council infrastructure projects throughout suburbs like Broadmeadows, Campbellfield, Craigieburn, Sunbury, and Tullamarine.
HCC Removable Bollard Specifications — SLD-2.3A
SHUG manufactures the HCC removable bollard to the following specifications as outlined in drawing SLD-2.3A:
Bollard Post:
- 125 x 125 x 4mm square galvanised steel post.
- Powder-coated in yellow for high visibility.
- Overall height between 1400mm and 1500mm.
- 60mm diameter reflectors fitted to the front and back of the bollard.
- 12mm diameter steel bar handles on both sides. Handles are orientated so as not to obstruct traffic flow on shared paths.
Sleeve:
- 140 x 140 x 4mm square galvanised steel sleeve.
- 200 x 30 x 5mm flat bar welded to the bottom of the sleeve for stability.
- 5mm thick steel collar at the top of the sleeve.
- 5mm thick steel checkplate flap with a slot for the eye bolt. The flap is hinged at the base and sits flush when folded down.
- 160 x 8mm smooth bar.
Locking Mechanism:
- Steel eye bolt and HCC standard padlock.
- 8mm thick steel plate welded to the galvanised bollard for the locking chain attachment point.
Concrete Footing:
- Minimum 25MPA concrete footing around the sleeve.
- 300mm wide concrete apron around the bollard in gravel or grass finish areas. The surface must fall away from the bollard to prevent water pooling.
Every component of the HCC removable bollard is manufactured to match the exact dimensions and materials specified in the council drawing.
Why Choose SHUG as Your Manufacturer?
SHUG prioritises quick production and delivery so your HCC removable bollard project stays on schedule
- Built to spec. Every HCC removable bollard we manufacture follows drawing SLD-2.3A precisely. There is no guesswork and no deviation from the approved design.
- Quality materials. We use galvanised steel and professional powder-coating to ensure each bollard meets the durability and finish standards required by council.
- Local manufacturing. Our bollards are made right here in Melbourne. As a result, lead times are shorter and communication is easier compared to interstate or overseas suppliers.
- Bulk and single orders. Whether you need one bollard for a small project or fifty for a major infrastructure rollout, we can accommodate your order.
- Fast turnaround. We understand that council projects run on tight timelines. SHUG prioritises quick production and delivery so your project stays on schedule.
Who Needs This Bollard?
The HCC removable bollard is commonly required for a range of projects within the Hume municipality.
- Civil contractors working on council road, path, and park projects that specify SLD-2.3A compliant bollards.
- Landscapers fitting out shared paths, reserves, and open spaces in new residential developments within Hume City Council boundaries.
- Property developers required to install council-standard bollards as a condition of their planning permit or development approval.
- Facility managers maintaining council assets who need replacement bollards or sleeves that match existing infrastructure.
If your project documentation references Hume City Council standard drawing SLD-2.3A or specifies a removable galvanised bollard to HCC standards, SHUG can manufacture exactly what you need.
HCC Removable Bollard Sleeve Assembly
Yes, SHUG can supply more than just the bollard post. We also manufacture and supply the complete sleeve assembly. This includes the 140x140x4mm sleeve, the flat bar base plate, the steel collar, the checkplate flap with hinge, and the eye bolt. We can supply the full kit so your installation team has everything needed for a compliant install.
Furthermore, we can advise on the concrete footing requirements to ensure the finished installation meets the minimum 25MPA standard specified in the drawing.
Yes, SHUG can supply more than just the HCC removable bollard post.
Servicing All Suburbs Within Hume
SHUG manufactures and supplies the HCC removable bollard for projects across the entire Hume municipality. This includes Broadmeadows, Campbellfield, Coolaroo, Craigieburn, Dallas, Gladstone Park, Greenvale, Jacana, Meadow Heights, Mickleham, Roxburgh Park, Sunbury, Tullamarine, and Westmeadows.
No matter where your project is located within Hume, we can deliver bollards to your site or workshop.
Get a Quote for Your HCC Removable Bollard
Ready to order? Contact SHUG Bollards today for a fast, no-obligation quote on custom manufactured bollards built to SLD-2.3A specifications.
Visit us at shug.com.au or give us a call to discuss your project requirements. We are ready to manufacture and deliver the exact HCC removable bollard you need, on time and to spec.
