Are you looking for a Yarra Ranges Council bollard manufactured to the official specification? SHUG Bollards can help. We custom manufacture removable bollards built to the Yarra Ranges Council standard detail drawing SDL/B10, ready for installation on shared pathways, reserves, and open space areas across the municipality.
Whether you are a contractor working on a council project, a landscaper fitting out a shared path, or a facility manager replacing existing infrastructure, SHUG can manufacture and supply these bollards to exact spec.
What Is the Yarra Ranges Council Standard Bollard?
The Yarra Ranges Council bollard is a removable steel bollard specified in the council’s Landscape — Open Space standard detail drawing SDL/B10. It is the required bollard type for shared pathways, parks, reserves, and maintenance access points within the Yarra Ranges municipality.
This bollard is designed to drop into a galvanised steel ground sleeve and is secured with a padlock that suits council’s lock system. As a result, only authorised personnel can remove the bollard when maintenance vehicle access is needed.
The design is robust, highly visible, and purpose-built for outdoor Australian conditions. It is commonly found along shared-use paths, recreation reserves, and open space areas throughout the Yarra Ranges, from Lilydale and Mooroolbark to Healesville and the Dandenong Ranges.
Yarra Ranges Council Bollard Specifications — SDL/B10
SHUG manufactures the Yarra Ranges Council bollard to the following specifications as outlined in drawing SDL/B10:
Bollard Post:
- 90mm diameter yellow steel removable bollard.
- 950mm height above finished ground level.
- Removable bollard handle welded to the post for easy lifting.
- Reflectors positioned 800mm above finished ground level.
- A tag with eyelet attached to the bollard to fit the hinged lid opening.
- Padlock to suit council’s lock system.
Ground Sleeve:
- Approved galvanised steel ground sleeve with hinged lid.
- Sleeve designed to ensure the bollard fits tight within it.
- 250mm sleeve depth below ground level.
- 300mm wide base.
Concrete Footing:
- Minimum 25MPA concrete footing with flange finish top.
- 350mm total depth below ground level including sleeve and footing.
Spacing (for multiple bollards):
- 1500mm spacing at centres maximum.
- 1 to 5 removable bollards per access point depending on the level of service and the width of maintenance vehicles that need to pass.
- Typically installed on 2500mm wide concrete shared pathways.
Every component of the Yarra Ranges Council bollard is manufactured to match the exact dimensions and materials specified in the standard detail drawing.
Why Choose SHUG as Your Manufacturer?
SHUG Bollards is a Melbourne-based manufacturer with proven experience producing bollards to council and utility specifications. Here is why contractors and project managers choose us:
- Built to spec. Every Yarra Ranges Council bollard we manufacture follows drawing SDL/B10 precisely. There is no guesswork and no deviation from the approved design.
- Quality materials. We use galvanised steel and professional powder-coating to deliver a durable, long-lasting bollard in the required Safety Yellow finish.
- Local manufacturing. Our bollards are made right here in Melbourne. As a result, lead times are shorter and communication is easier compared to interstate or overseas suppliers.
- Bulk and single orders. Whether you need one bollard for a small path upgrade or twenty for a major recreation reserve, we can accommodate your order.
- Fast turnaround. We understand that council projects run on tight timelines. SHUG prioritises quick production and delivery so your project stays on schedule.
Who Needs This Bollard?
The Yarra Ranges Council bollard is commonly required for a range of projects. For example:
- Civil contractors building or upgrading shared pathways and access tracks within the Yarra Ranges municipality.
- Landscapers fitting out recreation reserves, open space areas, and trail networks that require maintenance vehicle access control.
- Property developers required to install council-standard bollards as part of their landscaping obligations under planning permits.
- Facility managers maintaining existing council assets who need replacement bollards or sleeves that match current infrastructure.
If your project documentation references Yarra Ranges Council standard detail SDL/B10 or specifies a 90mm removable yellow steel bollard to council standards, SHUG can manufacture exactly what you need.
Yarra Ranges Council Bollard Sleeve Assembly
SHUG can supply more than just the bollard post. We also manufacture and supply the complete ground sleeve assembly with hinged lid. This means your installation team receives the full kit needed for a compliant installation.
Furthermore, we can advise on the concrete footing requirements to ensure the finished installation meets the minimum 25MPA standard and 350mm depth specified in the drawing.
Servicing All Areas Within Yarra Ranges
SHUG manufactures and supplies these bollards for projects across the entire municipality. This includes Lilydale, Mooroolbark, Chirnside Park, Mount Evelyn, Healesville, Yarra Glen, Wandin, Seville, Olinda, Sassafras, Monbulk, Belgrave, Upwey, Tecoma, and Kilsyth South.
No matter where your project is located within the Yarra Ranges, we can deliver bollards to your site or workshop.
Get a Quote for Your Yarra Ranges Council Bollard
Ready to order? Contact SHUG Bollards today for a fast, no-obligation quote on custom manufactured bollards built to SDL/B10 specifications.
Visit us at shug.com.au or give us a call to discuss your project requirements. We are ready to manufacture and deliver the exact Yarra Ranges Council bollard you need, on time and to spec.
